Please browse our most frequently asked questions and support articles below. If you can’t find the help you are looking for then you can contact us here.


Assessments

Go into your My Account page.

You will see a list of your registered courses. Each item in the list has a red chevron, click it.

This will cause that course in the list to expand out and you will see your course progress overview.

Within this overview you will see any assessments you have completed including your score and statistics.

Click the statistics icon. This will open a pop up with a breakdown of all your answers. From there you can see any questions you got wrong.

Category: Assessments

Comment on this FAQ

General Questions

No, this is an online course. You will need an Internet connection in order to watch the videos.

Comment on this FAQ

No, this is an online course. We have no plans to release the course on DVD at this time.

Comment on this FAQ

There are simply too many movements manufactured over the years for me to demonstrate each one of them. Even if I could, I do not have a stock of all of them on hand.

What we are teaching here are the practical steps in Watch repair which can universally be applied to any Watch movement you may be presented with in the future. Many Watch movements may have a service sheet available, but also, many don’t. So you need to know the basic principles and skills to apply in these cases.

Comment on this FAQ

There are no time limits, you can learn at your own pace and re-watch the course videos as many times as you like.

  • Scott Hatlee Scott Hatlee says:

    Thank you for answering this question for me. My free time is very limited and I did not want to start the courses if there was a time limit on completion. Having the ability to go back and review once I have paid for the course is also a very important element for me to have. I will be committing to Level 1 today.

  • Comment on this FAQ

    For the duration of Level 2 and the latter part of Level 1, we use the Unitas 6498 movement for illustrating the points in the lessons.

    This is technically a pocket watch movement and a very basic watch to get started with.

    However, the Swiss model of this movement is actually quite expensive and so you may wish to consider purchasing the Chinese clone which is available from many places worldwide.

    In the U.K. You may find the movement listed on the CousinsUK.com website under the code: CHI3620M

    On eBay, search for Unitas 6498 clone or Seagull 3620

  • In the lesson “c1.5.6 Identifying Watch Parts” it is mentioned that the practice movement is a “Chinese clone of the Unitas (ETA) 6497”. However as this help section states; the movement used in the video is indeed a clone of the Unitas (ETA) 6498. I’ve been able to establish this by comparing pictures of these two movements with the lesson video. However, I believe any of these two movements will be adequate as they look very similar.

  • Comment on this FAQ

    No, the free course is simply available to show you how our system works and the quality of the videos and lessons. A Try before you buy.

    We would hope that you would be impressed enough with the Free demo that you would be more than pleased to enrol on the course 🙂

    Comment on this FAQ

    As we have students wishing to enrol from many different countries, it is much simpler to provide the course in one currency which is the most universal. This just happens to be US dollars..

    For those in the U.K. We do have an option to pay via BACS in U.K. Pounds but you would need to contact us for the details.

    For those based in Thailand, we have a Thai bank account you can pay into, again, please contact us for details.

    Comment on this FAQ

    Providing the payment has been processed successfully by PayPal, you will have automatic and immediate access to your lessons.

    Simply log into your account here at WatchRepairLessons.com and you may notice a link in the navigation bar at the top of this website next to our logo labeled “My Account”. If you are on a Tablet or Mobile, this link may be compressed within an icon with three bars, if you click that icon, the link will be exposed.

    This video explains in detail:

    Click the My Account link and you will be presented with a list of your enrolled courses.

    Comment on this FAQ

    Unfortunately I do not undertake private work and I no longer live in the U.K.

    You can google “British Watch And Clockmakers Guild” or “British Horological Institute”

    They have a list of competent professionals who may be able to help.

    Comment on this FAQ

    Lesson Topics

    Fault finding forms a major part of Level 3 of the Watch repair course. This is now released and available to enrol.

    Comment on this FAQ

    Dynamic poising will be discussed and demonstrated in an upcoming course: “The Watch Timing Machine” where you will be taught that the timing machine is useful for much more than just regulating watches.

    Category: Lesson Topics

    Comment on this FAQ

    Level 1 specific questions

    For the duration of Level 2 and the latter part of Level 1, we use the Unitas 6498 movement for illustrating the points in the lessons.

    This is technically a pocket watch movement and a very basic watch to get started with.

    However, the Swiss model of this movement is actually quite expensive and so you may wish to consider purchasing the Chinese clone which is available from many places worldwide.

    In the U.K. You may find the movement listed on the CousinsUK.com website under the code: CHI3620M

    On eBay, search for Unitas 6498 clone or Seagull 3620

  • In the lesson “c1.5.6 Identifying Watch Parts” it is mentioned that the practice movement is a “Chinese clone of the Unitas (ETA) 6497”. However as this help section states; the movement used in the video is indeed a clone of the Unitas (ETA) 6498. I’ve been able to establish this by comparing pictures of these two movements with the lesson video. However, I believe any of these two movements will be adequate as they look very similar.

  • Comment on this FAQ

    If you are a Patron or WRT Subscriber then you are entitled to however much you have accumitively paid monthly, to be offset against the cost of The courses.

    As an example, if you have paid $10 over 12 months, then you have $120 in credit to offset against the cost of the courses here at WatchRepairLessons.com Once a particular level has been moved off the development platform

    The rebate is provided in order of the Levels of the courses.

    The page to claim your rebate against the course levels is here: https://www.watchrepairlessons.com/patron-subscriber-loyalty-discount/

    Comment on this FAQ

    In order to progress past any asessment, you first need to obtain a passing score of at least 80%

    Comment on this FAQ

    Providing the payment has been processed successfully by PayPal, you will have automatic and immediate access to your lessons.

    Simply log into your account here at WatchRepairLessons.com and you may notice a link in the navigation bar at the top of this website next to our logo labeled “My Account”. If you are on a Tablet or Mobile, this link may be compressed within an icon with three bars, if you click that icon, the link will be exposed.

    This video explains in detail:

    Click the My Account link and you will be presented with a list of your enrolled courses.

    Comment on this FAQ

    Fault finding forms a major part of Level 3 of the Watch repair course. This is now released and available to enrol.

    Comment on this FAQ

    Level 1 introduces you to all the basic tools needed and goes through the various components of the movement.

    Comment on this FAQ

    Level 2 specific questions

    For the duration of Level 2 and the latter part of Level 1, we use the Unitas 6498 movement for illustrating the points in the lessons.

    This is technically a pocket watch movement and a very basic watch to get started with.

    However, the Swiss model of this movement is actually quite expensive and so you may wish to consider purchasing the Chinese clone which is available from many places worldwide.

    In the U.K. You may find the movement listed on the CousinsUK.com website under the code: CHI3620M

    On eBay, search for Unitas 6498 clone or Seagull 3620

  • In the lesson “c1.5.6 Identifying Watch Parts” it is mentioned that the practice movement is a “Chinese clone of the Unitas (ETA) 6497”. However as this help section states; the movement used in the video is indeed a clone of the Unitas (ETA) 6498. I’ve been able to establish this by comparing pictures of these two movements with the lesson video. However, I believe any of these two movements will be adequate as they look very similar.

  • Comment on this FAQ

    If you are a Patron or WRT Subscriber then you are entitled to however much you have accumitively paid monthly, to be offset against the cost of The courses.

    As an example, if you have paid $10 over 12 months, then you have $120 in credit to offset against the cost of the courses here at WatchRepairLessons.com Once a particular level has been moved off the development platform

    The rebate is provided in order of the Levels of the courses.

    The page to claim your rebate against the course levels is here: https://www.watchrepairlessons.com/patron-subscriber-loyalty-discount/

    Comment on this FAQ

    In order to progress past any asessment, you first need to obtain a passing score of at least 80%

    Comment on this FAQ

    Providing the payment has been processed successfully by PayPal, you will have automatic and immediate access to your lessons.

    Simply log into your account here at WatchRepairLessons.com and you may notice a link in the navigation bar at the top of this website next to our logo labeled “My Account”. If you are on a Tablet or Mobile, this link may be compressed within an icon with three bars, if you click that icon, the link will be exposed.

    This video explains in detail:

    Click the My Account link and you will be presented with a list of your enrolled courses.

    Comment on this FAQ

    Fault finding forms a major part of Level 3 of the Watch repair course. This is now released and available to enrol.

    Comment on this FAQ

    You should have received an email with your discount coupon code. Check your spam folder but if you can not find it then please let us know and we will send it you ASAP.

  • Zaman Kassam Zaman Kassam says:

    I cannot find the email with the discount coupon code, as I have finished level 1 previousley with a 95% pass thanks.

  • Comment on this FAQ

    Patrons & Subscribers

    If you are a Patron or WRT Subscriber then you are entitled to however much you have accumitively paid monthly, to be offset against the cost of The courses.

    As an example, if you have paid $10 over 12 months, then you have $120 in credit to offset against the cost of the courses here at WatchRepairLessons.com Once a particular level has been moved off the development platform

    The rebate is provided in order of the Levels of the courses.

    The page to claim your rebate against the course levels is here: https://www.watchrepairlessons.com/patron-subscriber-loyalty-discount/

    Comment on this FAQ

    Website problems

    Make sure your browser is not zoomed in to above 100% – or try zooming your browser out in order to fit more on screen.

    This WIKI page explains how to adjust your browser zoom settings.

    https://www.wikihow.com/Zoom-With-a-Web-Browser

    or

    https://lifehacker.com/5815125/how-to-zoom-in-and-out-on-a-web-page

    or

    https://www.pcworld.com/article/2038445/how-to-undo-accidental-browser-zoom.html

    Comment on this FAQ

    Make sure your browser is not zoomed in to above 100% – or try zooming your browser out in order to fit more on screen.

    This WIKI page explains how to adjust your browser zoom settings.

    https://www.wikihow.com/Zoom-With-a-Web-Browser

    or

    https://lifehacker.com/5815125/how-to-zoom-in-and-out-on-a-web-page

    or

    https://www.pcworld.com/article/2038445/how-to-undo-accidental-browser-zoom.html

    Comment on this FAQ

    In order to progress past any asessment, you first need to obtain a passing score of at least 80%

    Comment on this FAQ

    Providing the payment has been processed successfully by PayPal, you will have automatic and immediate access to your lessons.

    Simply log into your account here at WatchRepairLessons.com and you may notice a link in the navigation bar at the top of this website next to our logo labeled “My Account”. If you are on a Tablet or Mobile, this link may be compressed within an icon with three bars, if you click that icon, the link will be exposed.

    This video explains in detail:

    Click the My Account link and you will be presented with a list of your enrolled courses.

    Comment on this FAQ

    Every lesson and topic has a “Mark Complete” button. Once you have watched the video, you can click this button and you will be taken to the next lesson, plus it will be made available to you from that point on.

    Comment on this FAQ

    Load More